Tilt Switch Probe, Model No. 21-39

from $480.00
sold out

The Ramsey tilt switch is actuated when material rises to tilt the probe 15 degrees or more from its vertical position. The mercury switch is precisely positioned so that, regardless of direction of tilt, the normally-closed contacts are caused to open. The switches are encapsulated in various sizes to suit the application.

This product meets CSA approvals for use in Normal and Hazardous Areas (rating of Class I, Divisions 1 and 2, Groups A, B, C, and D T2A, Class II, Division 1, Groups E, F, and G, Class II, Division 2, Groups F, and G Class III T160°C. Ta = 85°C max).

If shown as Sold Out, please contact for quote.

Cable Length:

The Ramsey tilt switch is actuated when material rises to tilt the probe 15 degrees or more from its vertical position. The mercury switch is precisely positioned so that, regardless of direction of tilt, the normally-closed contacts are caused to open. The switches are encapsulated in various sizes to suit the application.

This product meets CSA approvals for use in Normal and Hazardous Areas (rating of Class I, Divisions 1 and 2, Groups A, B, C, and D T2A, Class II, Division 1, Groups E, F, and G, Class II, Division 2, Groups F, and G Class III T160°C. Ta = 85°C max).

If shown as Sold Out, please contact for quote.

 

Ramsey Cast Iron Tilt Switch Probe 21-39

cCSAus Approvals for Normal and Hazardous Areas

Hazardous area probes MUST be used with hazardous area controls to be rated for hazardous areas

1" Cast Iron Probe with 8 Meter or 15 Meter Cable

Contact Rating: 1 Amp at 24VDC, Non-inductive

Rated for use in applications between -25°F to 180°F

Finish: Nickle Chrome

Rugged, abrasion-resistant tilt switch

Certifications: CSA, cCSAus, CE

All probes include mounting hardware

 
 

Resellers please contact us for bulk discounts.