Tilt Switch Control, Model No. 20-38-4

$1,117.00
sold out

The Control Unit is housed in a NEMA 4 enclosure with large green (“Normal”) and red (“Alarm”) indicating lights on the front cover. A 0-10 second adjustable time delay circuit in the control unit prevents momentary tilting of the switch from causing a false or premature contact transfer. Two normally-open and two normally-closed output contacts are available for connection to external alarms and/or controls. Interruption of line power causes a relay transfer. (Also referred to as model 20-38-115)

If shown as Sold Out, please contact for quote.

The Control Unit is housed in a NEMA 4 enclosure with large green (“Normal”) and red (“Alarm”) indicating lights on the front cover. A 0-10 second adjustable time delay circuit in the control unit prevents momentary tilting of the switch from causing a false or premature contact transfer. Two normally-open and two normally-closed output contacts are available for connection to external alarms and/or controls. Interruption of line power causes a relay transfer. (Also referred to as model 20-38-115)

If shown as Sold Out, please contact for quote.

 

Ramsey Steel Tilt Switch Control 20-38

Encloser Rating: NEMA 4

Power Requirements: 115 or 230 VAC versions, 50/60Hz +/- 10%

Outputs: One (1) DPDT contact. Rate at 10 Amp at 250 VAC or 30 VDC, non inductive

Time Delay: 0-10 seconds, adjustable

Circuitry Options: Select vertical or tilted probe position for “normal” condition

Rated for use in applications between -40°F to 158°F

Finish: Steel

Simple installation

 
 

Resellers please contact us for bulk discounts.

Ramsey 20-38 Control.jpg